Buy reinraumreinigung.eu ?
We are moving the project
reinraumreinigung.eu .
Are you interested in purchasing the domain
reinraumreinigung.eu ?
domain@kv-gmbh.de · 0541-91531010
Buy reinraumreinigung.eu ?
Does the Li-ion battery smell toxic after replacement if inhaled?
No, Li-ion batteries do not emit a toxic smell after replacement. However, it is important to handle them with care and follow proper safety procedures when replacing them to avoid any potential hazards. If there is a strong smell coming from a Li-ion battery, it may indicate a malfunction or damage, and it should be handled with caution and disposed of properly. **
Is a Li-Po or Li-Ion battery more dangerous?
Both Li-Po and Li-Ion batteries have the potential to be dangerous if mishandled or damaged. However, Li-Po batteries are generally considered to be more volatile and have a higher risk of catching fire or exploding compared to Li-Ion batteries. This is due to the different electrolyte composition and packaging of the two battery types. It is important to handle both types of batteries with care and follow proper charging and storage guidelines to minimize the risk of accidents. **
Xtar MC6C USB Battery Charger for Li-ion Batteries
A market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter
21,49 £*
Shipping: 2,49 £
Secure redirect to the provider
Xtar VC8 Fast USB Battery Charger for Li-ion Batteries
Conveniently powered by a USB-C supply, the new Xtar VC8 charger accepts up to eight batteries for simultaneous charging, depending on battery type. Highly portable; it connects to PC USB sockets or solar and smartphone chargers. sing clear LCD readouts, the voltage capacity, internal resistance and cell type will be displayed. A USB wall adapter is not included in this set but can be added in the bundles section on this page, it should be noted that if you are using your own adapter, it should be of 15W so that the charger can run at peak performance. The versatile VC8 Charger has the ability to charge 1.2 Volt NiMH/NiCd AAAA, AAA, AA, A, SC and C cells as well as Li-ion/IMR/INR/ICR 3.6V/3.7V battery codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500 and 26650. Also, it will charge protected and unprotected 20700 and 21700 cells. Other key features include: Input: QC3.0 i.e. 5 Volts 2 Amps or 9 Volts 2 Amps Channel 1 and 8 have a peak output of 3V that can be adjusted down to 2A, 1A, 0.5A, or 0.25A for each slot. He higher the Amp, the quicker the battery will charge. At the end of the charging cycle, maximum potential is 4.2V (± 0.05V) or 1.45V (±0.1 Volts. Selects 0△V (zero delta voltage) and -△V (minus delta) modes automatically to enhance cell performance. Automatic safety protection against polarity errors, overcharging and short circuit. Flame-retardant construction. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 4 (applies when charging 4 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 2 / 0.5A × 4 (applies when charging 1–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has ensured it can get as much information on the condition of your batteries as possible, to ensure high quality charging. Grade mode (through channels 1 to 4) tests the batteries capacity through charge, discharge and repeated charge cycles and storage mode will double check for correct voltage level. Dimensions: 194mm (length) x 134mm (width) x 34 millimetres (height). Net weight: 350 grammes. Recommended operating temperature range: 0° to 40°C. OPTIONAL BUNDLE: None, Inc. Wall Adapter
34,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Similar search terms for DataLogic-Li-Ion-Replacement-Battery
Top-Angebote
Products related to DataLogic-Li-Ion-Replacement-Battery:
-
Xtar VC4SL USB Battery Charger for Li-Ion and NiMH BatteriesThe VC4SL Battery Charger Set from Xtar includes a charger, USB-C to USB-C charge cable and manual, presented in a premium pouch. Designed for use with compatible AAAA, AAA, AA, A, SC, C, and Ni-MH/Ni-CD cells, as well as Xtar 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650, 32650 3.6V/3.7V Li-ion batteries, this specialist charger is cost-effective and versatile. This charger will charge 4 smaller cells or 2 large C cells simultaneously. With the capacity to charge up to four cells simultaneously or independently, the Xtar VC4SL battery charger is a practical option, while its intelligent design means that it can automatically detect battery types, and select the appropriate charging method and current for them (from 0.1A to 1.0A and up to 0.5A*4 / 1.0A*2 max). It will also notify you if the cells you are trying to charge are faulty or if it detects reverse polarity. The Xtar VC4SL charger's cycle has three stages to prolong the life of your cells, and a soft start to minimise drain and damage from sudden energy spikes. Dependable and safe, it also has an accurate LCD display. The maximum number of batteries which can be charged simultaneously is dependant on the type of battery used. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) AA/AAA 1.5V Li-ion charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This charger does not come with a wall adaptor and we recommend adding the 'optional bundle' when purchasing. This charger cannot be powered by a low power mobile phone charger and needs a 15W or 3A wall adaptor like a USB-C laptop or large tablet adaptor. OPTIONAL BUNDLE: None, Inc. Wall Adapter26,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC2 Plus Portable USB Battery Charger Set for Li-ion BatteriesThe versatile Xtar MC2 Plus USB battery charger set for specialist Li-ion batteries has an easy to read display and offers you the convenience of charging two cells at once. This charger is highly portable, suitable for on the go charging with its USB micro-charging port power source. Additionally, using innovative technology, it also has a 0V reactivation function, which allows it to bring over-discharged batteries back to life. Other features include: Can charge following battery sizes: 3.6/3.7V Li-ion, IMR, INR and ICR batteries in addition to size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700. Can charge two channels with a constant current of 1 Amp each or one channel at a constant current of 2 Amps. The higher the current, the faster the charge. Recommended operating temperature: 0°C - 40 degrees Celsius. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has also prioritised safety features, with this fire-retardant charger having the ability to detect reverse polarity and short circuit conditions, all whilst monitoring the temperature to ensure protection against over-heating. This competitively priced charger also comes with a twelve-month manufacturer’s warranty. It should be noted a USB adapter is not included, but in ‘optional bundle’ section above, one can be added to your order. If you use your own USB adaptor, a 15W adaptor is required for the unit to charge at full speed. This charger is not suitable for charging protected cells. Dimensions: 9.6 centimetres (length) by 4.7cm (width) by 2.6cm (height). OPTIONAL BUNDLE: None, Inc. Wall Adapter10,75 £*Shipping: 2,49 £Secure redirect to the provider
-
Makita BL1830B 18V LXT 3.0Ah Li-Ion Battery – Charge Level Indicator – 197599-5 – Black.gadcet-pdp{--g-green:#00a651;color:#1f2430;line-height:1.55;font-size:inherit;max-width:760px}.gadcet-pdp>*:first-child{margin-top:0}.gadcet-pdp p{margin:0 0.9em}.gadcet-pdp h3{font-size:1.05em;font-weight:600;color:#11161f;margin:1.4em 0.5em;padding-left:.5em;border-left:3px solid var(--g-green);border-radius:0;line-height:1.3}.gadcet-pdp ul{list-style:none!important;margin:0 0.9em;padding:0!important}.gadcet-pdp ul li{position:relative;padding:.1em 0.1em 1.5em;margin:0}.gadcet-pdp ul li::before{content:"";position:absolute;left:.16em;top:.45em;width:.36em;height:.66em;border:solid var(--g-green);border-width:0.14em.14em 0;transform:rotate(45deg)}.gadcet-pdp table{width:100%;border-collapse:collapse;margin:.3em 0 1em;font-size:.95em;border:1px solid #e7e9ee!important;border-radius:8px;overflow:hidden}.gadcet-pdp table td{padding:.5em.8em;border-bottom:1px solid #eef0f4!important;vertical-align:top}.gadcet-pdp table tr:last-child td{border-bottom:0!important}.gadcet-pdp table tr:nth-child(even){background:#f7f9f8}.gadcet-pdp table td:first-child{font-weight:600;color:#454c59;width:40%}@media (max-width:600px){.gadcet-pdp table td:first-child{width:42%}} Keep your Makita cordless tools powered and ready with a new Makita BL1830B 18V LXT 3.0Ah Li-Ion Battery – a reliable spare or replacement pack for your existing kit. Key Features Compatible with Makita 18V LXT cordless tools, part of the LXT platform 3.0Ah lithium-ion capacity provides 54Wh of usable energy Driving side includes a battery charge level indicator – instantly see remaining power Rapid-charge compatible – around 22 minutes with a DC18RC charger (per Makita's current figures) Slide-on LXT design for quick battery changes Weight of approx. 0.64 kg keeps handheld tools balanced Compact size: 113mm × 75mm × 62mm No memory effect – top up at any stage Benefits Check capacity before starting or continuing work to avoid mid-task stops Simple, fast battery swaps keep your tool running longer – especially useful for pro jobs or extended DIY Lightweight construction reduces strain on the wrist and improves control during detailed work Rapid charger compatibility means less wait time One battery platform powers a wide range of Makita LXT tools Specifications Voltage 18V Capacity 3.0Ah Energy 54Wh Weight approx. 0.64kg Dimensions 113mm × 75mm × 62mm What You'll Receive 1 × new Makita BL1830B 18V LXT 3.0Ah Lithium-Ion Battery (condition: New) Ideal For Professionals and DIY enthusiasts who already use Makita LXT tools and want a genuine spare or replacement battery that offers a good tradeoff between runtime and weight, especially for handheld drills & impact drivers.49,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Xtar MC4S Charger for Li-ion BatteriesHighly efficient, the new Xtar MC4S charges up to four Ni-MH, Ni-CD or Li-ion batteries at once. It represents excellent value and is a respected leader in its category. This pack includes a USB-C to USB-C power cable; however, a USB wall adapter is not included in this set, but the option to add one on is available in the bundles section above. We recommend if you are going to use your own adaptor, to check that it is 15W as this is required for optimal performance. Convenient to use worldwide, this charger is compatible with wall adapters, smartphone and solar chargers as well as power banks and computers. To ensure your batteries receive high-quality charging, Xtar have included a self-selected 0V trickle charge phase especially for totally discharged cells, to maximise battery life. It will also automatically switch between constant current fast charge, to constant voltage phase when the batteries are near the end of their charging cycle, for full battery potential. Additional features include: Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells, including size codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500 and 26650. Accepts two 26650 batteries (CH1 and CH4) and two unprotected type 21700 batteries (in CH2 and CH3) simultaneously. Not for use with protected type 20700 and 21700 cells. Charging current of 1 Amp (through two ports) or 0.5A (through four ports). The higher the Amp, the quicker the battery will charge, with a maximum potential: 4.2 Volts. Operating temperature range: 0°C (minimum) to 40° Celsius (maximum). Flame-retardant casing. Xtar have also ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 2 (applies when charging 2 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. so ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Dimensions: 100mm (length) x 97mm (width) x 26.5 millimetres (height). Net weight: 95 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
How do you charge a Li-Ion battery?
To charge a Li-Ion battery, you will need a compatible charger specifically designed for Li-Ion batteries. First, plug the charger into a power source and then connect the battery to the charger. Make sure to use the correct voltage and current settings on the charger to avoid damaging the battery. Allow the battery to charge fully before disconnecting it from the charger. It's important to follow the manufacturer's instructions and safety guidelines when charging Li-Ion batteries to ensure proper and safe charging. **
-
Is a 2-cell Li-ion battery sufficient?
The sufficiency of a 2-cell Li-ion battery depends on the specific application and power requirements. For some low-power devices such as small electronic gadgets or wearables, a 2-cell Li-ion battery may be sufficient. However, for more power-hungry devices such as laptops or electric vehicles, a 2-cell battery may not provide enough capacity and voltage to meet the demands of the application. It's important to consider the power needs and space constraints of the device when determining if a 2-cell Li-ion battery is sufficient. **
-
What is better in a smartphone, a Li-Po battery or a Li-Ion battery?
Both Li-Po (Lithium Polymer) and Li-Ion (Lithium Ion) batteries have their own advantages. Li-Po batteries are generally lighter, more flexible in shape, and have a lower profile, making them suitable for thinner smartphones. On the other hand, Li-Ion batteries have a longer lifespan and higher energy density, providing more power for longer periods of time. Ultimately, the choice between the two depends on the specific needs and priorities of the smartphone user. **
-
What is the difference between a Li-Ion and a Li-Poly battery?
The main difference between a Li-Ion (Lithium-Ion) and a Li-Poly (Lithium-Polymer) battery is the electrolyte used in each. Li-Ion batteries use a liquid electrolyte, while Li-Poly batteries use a solid or gel-like electrolyte. This allows Li-Poly batteries to be more flexible in shape and size, making them ideal for thinner devices. Li-Poly batteries also tend to have a lower risk of leakage and can provide slightly higher energy density compared to Li-Ion batteries. **
Xtar SC2 Fast Charger for Li-ion Batteries
The Xtar SC2 charger for Li-ion batteries has a micro-USB charging supply which makes it portable worldwide. With a double-slot design, this charger has a USB micro port that is compatible with 5.0 Volt USB connections, which includes laptops and power banks. A USB adapter is not included, if you do not own one that is 15W, you add one on in the ‘optional bundle’ section to ensure optimum performance. Supports 0.5A, 1A and 2A charging currents. So, for example, two batteries can be charged at 1A or one battery can be charged at 2A. The higher the Amp, the faster the charge. It is high quality, compact and easy to use charger and has the following features: Charging progress displayed though LED indicators. 3.6V/3.7V Li-ion charging current: 2A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Over-discharged cells can be gradually revived through the 0V battery activation feature. Has a soft start feature which when the charging cycle begins, the charging current is slowly increased to protect and prolong the batteries life. Suitable for recharging Li-ion battery size codes: 18650, 18700, 20700, 21700, 22650, 25500 and 26650 with a nominal potential of 3.6V or 3.7 Volts. OPTIONAL BUNDLE: None, Inc. Wall Adapter
13,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Xtar VP4 Plus Dragon Charger Set for Li-Ion Batteries
Unlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!
62,95 £*
Shipping: 2,49 £
Secure redirect to the provider
Does a Li-ion and Li-Po battery swell in a stored state?
Yes, both Li-ion and Li-Po batteries can swell in a stored state. This swelling can occur due to a variety of factors such as overcharging, exposure to high temperatures, or simply aging. When a battery swells, it can become damaged and potentially pose a safety risk. It is important to store these batteries in a cool, dry place and to avoid overcharging them to prevent swelling. **
How much C-Li-Ion battery can be charged?
The amount of C-Li-Ion battery that can be charged depends on the capacity of the battery and the charging rate. Typically, a C-Li-Ion battery can be charged up to its full capacity, which is measured in milliampere-hours (mAh) or watt-hours (Wh). It is important to follow the manufacturer's guidelines for charging to ensure the battery is charged safely and efficiently. Overcharging can lead to reduced battery life and potential safety hazards. **
Top-Angebote
Products related to DataLogic-Li-Ion-Replacement-Battery:
-
Xtar MC6C USB Battery Charger for Li-ion BatteriesA market leader within its category, the portable Xtar MC6C charger can charge up to six lithium-ion batteries at once, depending on cell type. Easy to use, it can be connected to your mains, vehicle or PC though a micro-USB or DC input for on-the-go charging. This charger set does include a a USB-C to USB-C cable, but an adapter is not provided, though one can be added to your order in the ‘optional bundle’ section on this page. We recommend that if you are using your own adaptor, that it is 15W as this is required for optimum performance. This cost-effective charger has a clear LCD display, with gives a reading of both the charging current and the battery power. It has the ability to charge three ports with a constant current of 1 Amp or six ports with a constant current of 0.5 Amps. Therefore, less batteries will result in a faster charge. A 0 Volt sensor has also been included, which means it can revive discharged batteries for maximum cell performance. Additional features include: Suitable for product size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700 (unprotected), 22650, 25500, 26650 and Flat-32650. Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells except protected 21700/20700. Can recharge two 26650 batteries in CH1 and CH4 plus four 18650 cells in CH2 to CH5 simultaneously. Self-adjusting output enables continued functioning, even with low power input. Anti-reverse polarity indication, with short circuit and over-temperature protection. Robust design with flame-retardant and fire-resistant ABS casing Operating temperature limits: 0°C minimum to 40°C. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) AA/AAA 1.5V Li-ion charging current: 1A × 2 / 0.5A × 4 (applies when charging 2–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This high-quality charger also comes with a twelve-month manufacturer's warranty. Dimensions: 111mm (length) x 148mm (width) x 34 millimetres (height). Net weight: 205 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter21,49 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VC8 Fast USB Battery Charger for Li-ion BatteriesConveniently powered by a USB-C supply, the new Xtar VC8 charger accepts up to eight batteries for simultaneous charging, depending on battery type. Highly portable; it connects to PC USB sockets or solar and smartphone chargers. sing clear LCD readouts, the voltage capacity, internal resistance and cell type will be displayed. A USB wall adapter is not included in this set but can be added in the bundles section on this page, it should be noted that if you are using your own adapter, it should be of 15W so that the charger can run at peak performance. The versatile VC8 Charger has the ability to charge 1.2 Volt NiMH/NiCd AAAA, AAA, AA, A, SC and C cells as well as Li-ion/IMR/INR/ICR 3.6V/3.7V battery codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500 and 26650. Also, it will charge protected and unprotected 20700 and 21700 cells. Other key features include: Input: QC3.0 i.e. 5 Volts 2 Amps or 9 Volts 2 Amps Channel 1 and 8 have a peak output of 3V that can be adjusted down to 2A, 1A, 0.5A, or 0.25A for each slot. He higher the Amp, the quicker the battery will charge. At the end of the charging cycle, maximum potential is 4.2V (± 0.05V) or 1.45V (±0.1 Volts. Selects 0△V (zero delta voltage) and -△V (minus delta) modes automatically to enhance cell performance. Automatic safety protection against polarity errors, overcharging and short circuit. Flame-retardant construction. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 4 (applies when charging 4 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 2 / 0.5A × 4 (applies when charging 1–4 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has ensured it can get as much information on the condition of your batteries as possible, to ensure high quality charging. Grade mode (through channels 1 to 4) tests the batteries capacity through charge, discharge and repeated charge cycles and storage mode will double check for correct voltage level. Dimensions: 194mm (length) x 134mm (width) x 34 millimetres (height). Net weight: 350 grammes. Recommended operating temperature range: 0° to 40°C. OPTIONAL BUNDLE: None, Inc. Wall Adapter34,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VC4SL USB Battery Charger for Li-Ion and NiMH BatteriesThe VC4SL Battery Charger Set from Xtar includes a charger, USB-C to USB-C charge cable and manual, presented in a premium pouch. Designed for use with compatible AAAA, AAA, AA, A, SC, C, and Ni-MH/Ni-CD cells, as well as Xtar 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 22650, 25500, 26650, 32650 3.6V/3.7V Li-ion batteries, this specialist charger is cost-effective and versatile. This charger will charge 4 smaller cells or 2 large C cells simultaneously. With the capacity to charge up to four cells simultaneously or independently, the Xtar VC4SL battery charger is a practical option, while its intelligent design means that it can automatically detect battery types, and select the appropriate charging method and current for them (from 0.1A to 1.0A and up to 0.5A*4 / 1.0A*2 max). It will also notify you if the cells you are trying to charge are faulty or if it detects reverse polarity. The Xtar VC4SL charger's cycle has three stages to prolong the life of your cells, and a soft start to minimise drain and damage from sudden energy spikes. Dependable and safe, it also has an accurate LCD display. The maximum number of batteries which can be charged simultaneously is dependant on the type of battery used. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) AA/AAA 1.5V Li-ion charging current: 2A × 1 / 1A × 2 / 0.5A × 2 (applies when charging 1–5 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. This charger does not come with a wall adaptor and we recommend adding the 'optional bundle' when purchasing. This charger cannot be powered by a low power mobile phone charger and needs a 15W or 3A wall adaptor like a USB-C laptop or large tablet adaptor. OPTIONAL BUNDLE: None, Inc. Wall Adapter26,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar MC2 Plus Portable USB Battery Charger Set for Li-ion BatteriesThe versatile Xtar MC2 Plus USB battery charger set for specialist Li-ion batteries has an easy to read display and offers you the convenience of charging two cells at once. This charger is highly portable, suitable for on the go charging with its USB micro-charging port power source. Additionally, using innovative technology, it also has a 0V reactivation function, which allows it to bring over-discharged batteries back to life. Other features include: Can charge following battery sizes: 3.6/3.7V Li-ion, IMR, INR and ICR batteries in addition to size codes 10440, 14500, 14650, 16340, 17335, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700 and 21700. Can charge two channels with a constant current of 1 Amp each or one channel at a constant current of 2 Amps. The higher the current, the faster the charge. Recommended operating temperature: 0°C - 40 degrees Celsius. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Xtar has also prioritised safety features, with this fire-retardant charger having the ability to detect reverse polarity and short circuit conditions, all whilst monitoring the temperature to ensure protection against over-heating. This competitively priced charger also comes with a twelve-month manufacturer’s warranty. It should be noted a USB adapter is not included, but in ‘optional bundle’ section above, one can be added to your order. If you use your own USB adaptor, a 15W adaptor is required for the unit to charge at full speed. This charger is not suitable for charging protected cells. Dimensions: 9.6 centimetres (length) by 4.7cm (width) by 2.6cm (height). OPTIONAL BUNDLE: None, Inc. Wall Adapter10,75 £*Shipping: 2,49 £Secure redirect to the provider
-
Does the Li-ion battery smell toxic after replacement if inhaled?
No, Li-ion batteries do not emit a toxic smell after replacement. However, it is important to handle them with care and follow proper safety procedures when replacing them to avoid any potential hazards. If there is a strong smell coming from a Li-ion battery, it may indicate a malfunction or damage, and it should be handled with caution and disposed of properly. **
-
Is a Li-Po or Li-Ion battery more dangerous?
Both Li-Po and Li-Ion batteries have the potential to be dangerous if mishandled or damaged. However, Li-Po batteries are generally considered to be more volatile and have a higher risk of catching fire or exploding compared to Li-Ion batteries. This is due to the different electrolyte composition and packaging of the two battery types. It is important to handle both types of batteries with care and follow proper charging and storage guidelines to minimize the risk of accidents. **
-
How do you charge a Li-Ion battery?
To charge a Li-Ion battery, you will need a compatible charger specifically designed for Li-Ion batteries. First, plug the charger into a power source and then connect the battery to the charger. Make sure to use the correct voltage and current settings on the charger to avoid damaging the battery. Allow the battery to charge fully before disconnecting it from the charger. It's important to follow the manufacturer's instructions and safety guidelines when charging Li-Ion batteries to ensure proper and safe charging. **
-
Is a 2-cell Li-ion battery sufficient?
The sufficiency of a 2-cell Li-ion battery depends on the specific application and power requirements. For some low-power devices such as small electronic gadgets or wearables, a 2-cell Li-ion battery may be sufficient. However, for more power-hungry devices such as laptops or electric vehicles, a 2-cell battery may not provide enough capacity and voltage to meet the demands of the application. It's important to consider the power needs and space constraints of the device when determining if a 2-cell Li-ion battery is sufficient. **
Similar search terms for DataLogic-Li-Ion-Replacement-Battery
-
Makita BL1830B 18V LXT 3.0Ah Li-Ion Battery – Charge Level Indicator – 197599-5 – Black.gadcet-pdp{--g-green:#00a651;color:#1f2430;line-height:1.55;font-size:inherit;max-width:760px}.gadcet-pdp>*:first-child{margin-top:0}.gadcet-pdp p{margin:0 0.9em}.gadcet-pdp h3{font-size:1.05em;font-weight:600;color:#11161f;margin:1.4em 0.5em;padding-left:.5em;border-left:3px solid var(--g-green);border-radius:0;line-height:1.3}.gadcet-pdp ul{list-style:none!important;margin:0 0.9em;padding:0!important}.gadcet-pdp ul li{position:relative;padding:.1em 0.1em 1.5em;margin:0}.gadcet-pdp ul li::before{content:"";position:absolute;left:.16em;top:.45em;width:.36em;height:.66em;border:solid var(--g-green);border-width:0.14em.14em 0;transform:rotate(45deg)}.gadcet-pdp table{width:100%;border-collapse:collapse;margin:.3em 0 1em;font-size:.95em;border:1px solid #e7e9ee!important;border-radius:8px;overflow:hidden}.gadcet-pdp table td{padding:.5em.8em;border-bottom:1px solid #eef0f4!important;vertical-align:top}.gadcet-pdp table tr:last-child td{border-bottom:0!important}.gadcet-pdp table tr:nth-child(even){background:#f7f9f8}.gadcet-pdp table td:first-child{font-weight:600;color:#454c59;width:40%}@media (max-width:600px){.gadcet-pdp table td:first-child{width:42%}} Keep your Makita cordless tools powered and ready with a new Makita BL1830B 18V LXT 3.0Ah Li-Ion Battery – a reliable spare or replacement pack for your existing kit. Key Features Compatible with Makita 18V LXT cordless tools, part of the LXT platform 3.0Ah lithium-ion capacity provides 54Wh of usable energy Driving side includes a battery charge level indicator – instantly see remaining power Rapid-charge compatible – around 22 minutes with a DC18RC charger (per Makita's current figures) Slide-on LXT design for quick battery changes Weight of approx. 0.64 kg keeps handheld tools balanced Compact size: 113mm × 75mm × 62mm No memory effect – top up at any stage Benefits Check capacity before starting or continuing work to avoid mid-task stops Simple, fast battery swaps keep your tool running longer – especially useful for pro jobs or extended DIY Lightweight construction reduces strain on the wrist and improves control during detailed work Rapid charger compatibility means less wait time One battery platform powers a wide range of Makita LXT tools Specifications Voltage 18V Capacity 3.0Ah Energy 54Wh Weight approx. 0.64kg Dimensions 113mm × 75mm × 62mm What You'll Receive 1 × new Makita BL1830B 18V LXT 3.0Ah Lithium-Ion Battery (condition: New) Ideal For Professionals and DIY enthusiasts who already use Makita LXT tools and want a genuine spare or replacement battery that offers a good tradeoff between runtime and weight, especially for handheld drills & impact drivers.49,00 £*Shipping: 0,00 £Secure redirect to the provider
-
Xtar MC4S Charger for Li-ion BatteriesHighly efficient, the new Xtar MC4S charges up to four Ni-MH, Ni-CD or Li-ion batteries at once. It represents excellent value and is a respected leader in its category. This pack includes a USB-C to USB-C power cable; however, a USB wall adapter is not included in this set, but the option to add one on is available in the bundles section above. We recommend if you are going to use your own adaptor, to check that it is 15W as this is required for optimal performance. Convenient to use worldwide, this charger is compatible with wall adapters, smartphone and solar chargers as well as power banks and computers. To ensure your batteries receive high-quality charging, Xtar have included a self-selected 0V trickle charge phase especially for totally discharged cells, to maximise battery life. It will also automatically switch between constant current fast charge, to constant voltage phase when the batteries are near the end of their charging cycle, for full battery potential. Additional features include: Recharges 3.6V and 3.7V Li-ion, IMR, INR and ICR specialist cells, including size codes 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22650, 25500 and 26650. Accepts two 26650 batteries (CH1 and CH4) and two unprotected type 21700 batteries (in CH2 and CH3) simultaneously. Not for use with protected type 20700 and 21700 cells. Charging current of 1 Amp (through two ports) or 0.5A (through four ports). The higher the Amp, the quicker the battery will charge, with a maximum potential: 4.2 Volts. Operating temperature range: 0°C (minimum) to 40° Celsius (maximum). Flame-retardant casing. Xtar have also ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Charging current and maximum supported battery capacity Information 3.6V/3.7V Li-ion charging current: 0.5A or 1A × 2 (applies when charging 2 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. so ensured this charger has protection against reversed polarity, overcharge, short circuit, excess current and over-temperature to ensure safe charging. Dimensions: 100mm (length) x 97mm (width) x 26.5 millimetres (height). Net weight: 95 grammes. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar SC2 Fast Charger for Li-ion BatteriesThe Xtar SC2 charger for Li-ion batteries has a micro-USB charging supply which makes it portable worldwide. With a double-slot design, this charger has a USB micro port that is compatible with 5.0 Volt USB connections, which includes laptops and power banks. A USB adapter is not included, if you do not own one that is 15W, you add one on in the ‘optional bundle’ section to ensure optimum performance. Supports 0.5A, 1A and 2A charging currents. So, for example, two batteries can be charged at 1A or one battery can be charged at 2A. The higher the Amp, the faster the charge. It is high quality, compact and easy to use charger and has the following features: Charging progress displayed though LED indicators. 3.6V/3.7V Li-ion charging current: 2A × 1 (applies when charging 1 battery) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. Over-discharged cells can be gradually revived through the 0V battery activation feature. Has a soft start feature which when the charging cycle begins, the charging current is slowly increased to protect and prolong the batteries life. Suitable for recharging Li-ion battery size codes: 18650, 18700, 20700, 21700, 22650, 25500 and 26650 with a nominal potential of 3.6V or 3.7 Volts. OPTIONAL BUNDLE: None, Inc. Wall Adapter13,95 £*Shipping: 2,49 £Secure redirect to the provider
-
Xtar VP4 Plus Dragon Charger Set for Li-Ion BatteriesUnlock the True Potential of Your Batteries: Introducing the Xtar VP4 Dragon, Your Battery's Personal Trainer. Powerful, intelligent, and versatile—the Xtar VP4 Dragon is here to transform your battery charging experience. It's designed to not only charge your 3.7V Li-ion batteries as well as 1.2V AA & AAA NiMH; but also to maximize their lifespan, performance, and overall health. Here's how the VP4 Dragon elevates your battery game: 4-Bay Charging Powerhouse: Fuel up to four batteries simultaneously, with each bay operating independently. This means you can mix and match battery types and sizes without compromising charging efficiency. Universal Battery Compatibility: The VP4 Dragon welcomes a wide range of battery guests, including 3.7V lithium-ion 18650, 26650, 14500, 16340, and NiMH AA and AAA. It's your one-stop charging solution for virtually any battery in your arsenal. Smart Charging Technology: This charger goes beyond basic power delivery. It intelligently analyzes each battery and selects the optimal charging current, ensuring maximum lifespan, performance, and safety. Advanced Battery Care Features: Dig deeper into your battery health with the VP4 Dragon's capacity testing, internal resistance measurement, and refresh mode. These tools help you identify tired cells and take proactive steps to revitalize them. Intuitive LCD Interface: Stay informed with a clear display that shows real-time charging progress, voltage, and internal resistance for each battery. No more guesswork, just complete control. Comprehensive Safety Features: Rest assured that your batteries and the charger are protected against overcharging, over-discharging, reverse polarity, and short circuits. The VP4 Dragon prioritizes safety at every level. Charging current and maximum supported battery capacity Information AA/AAA 1.2V Ni-MH charging current: 0.5A × 8 (applies when charging 8 batteries) 3.6V/3.7V Li-ion charging current: 3A × 1 / 2A × 2 / 1A × 4 / 0.5A × 8 (applies when charging 1–8 batteries) Max capacity: No limit — charger detects full charge via battery voltage; display caps at 9,999mAh but full charging is unaffected. The VP4 Dragon is more than a charger. It's a performance optimizer, and a trusted guardian of your power sources. Experience the difference intelligent charging can make and unlock the true potential of your batteries. Please note: To unleash the full charging speed of the VP4 Dragon, a separate power USB adapter is required (not included). Select 'optional bundle' when adding to cart. Ready to empower your batteries and simplify your charging life? Order your Xtar VP4 Dragon today!62,95 £*Shipping: 2,49 £Secure redirect to the provider
-
What is better in a smartphone, a Li-Po battery or a Li-Ion battery?
Both Li-Po (Lithium Polymer) and Li-Ion (Lithium Ion) batteries have their own advantages. Li-Po batteries are generally lighter, more flexible in shape, and have a lower profile, making them suitable for thinner smartphones. On the other hand, Li-Ion batteries have a longer lifespan and higher energy density, providing more power for longer periods of time. Ultimately, the choice between the two depends on the specific needs and priorities of the smartphone user. **
-
What is the difference between a Li-Ion and a Li-Poly battery?
The main difference between a Li-Ion (Lithium-Ion) and a Li-Poly (Lithium-Polymer) battery is the electrolyte used in each. Li-Ion batteries use a liquid electrolyte, while Li-Poly batteries use a solid or gel-like electrolyte. This allows Li-Poly batteries to be more flexible in shape and size, making them ideal for thinner devices. Li-Poly batteries also tend to have a lower risk of leakage and can provide slightly higher energy density compared to Li-Ion batteries. **
-
Does a Li-ion and Li-Po battery swell in a stored state?
Yes, both Li-ion and Li-Po batteries can swell in a stored state. This swelling can occur due to a variety of factors such as overcharging, exposure to high temperatures, or simply aging. When a battery swells, it can become damaged and potentially pose a safety risk. It is important to store these batteries in a cool, dry place and to avoid overcharging them to prevent swelling. **
-
How much C-Li-Ion battery can be charged?
The amount of C-Li-Ion battery that can be charged depends on the capacity of the battery and the charging rate. Typically, a C-Li-Ion battery can be charged up to its full capacity, which is measured in milliampere-hours (mAh) or watt-hours (Wh). It is important to follow the manufacturer's guidelines for charging to ensure the battery is charged safely and efficiently. Overcharging can lead to reduced battery life and potential safety hazards. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.